DeskArtes IDS/RT 4.6 installation for Mac OS X 10.5 (Leopard) Intel                  31.3.2009

Requirements:

- Apple Macintosh with Intel Core Solo or Intel Core Duo processor
- Intel GMA950, ATI Radeon or NVIDIA GeForce graphics adapter
- Mac OS X 10.5 (Leopard)
- 3-button or wheel mouse recommended

The program is tested with the following machine configurations:

- Apple Mac mini
- 1.5 GHz Intel Core Solo
- 512 MB DDR2 SDRAM
- Intel GMA with 32 MB DDR SDRAM
- Mac OS X 10.5.5
- Logitech Cordless Optical Mouse

Installation notes:

The Installation consist of two packages, the actual IDS/RT software and the External utilities. The External utilities can be left out from the installation, if they are already installed on the machine. The packages for the installation can be selected by clicking the "Customize" button in the "Installation type" phase. 

- If the OpenMotif3 is installed with Fink package tool to the "/sw" directory of the machine, you should leave the OpenMotif3 package out from the installation.

On Mac OS X 10.5 (Leopard) the X11 is included in the default installation. Therefore it is not included in the DeskArtes IDS/RT installation package. 

- If the X11 is left out in a modified Mac OS X 10.5 (Leopard) installation, it should be installed from the Mac OS X 10.5 (Leopard) installation disk. It is found there in the Optional Installs package.

Installation:

1. Double click the disk image "DeskArtesIDSRT46intel.dmg" to open it in a Finder window.
2. Inside the Finder window double click the meta package "DeskArtesIDSRT.mpkg" to start the installer. 

Configuring user accounts:

After the Installation is done, you have to configure the environment for the DeskArtes IDS/RT use.

1. Start a terminal window from Finder window directory "Applications/Utilities/Terminal".
2. Run command "/Applications/DeskArtes/DAconfig" in the Terminal window to configure the IDS/RT for the current user.

After successful user configuration you should get the message
"The configuration for <user> is done OK". Now you can close this Terminal.

Configuration needs to be done for each user account before running DeskArtes
IDS/RT with that account.

Running DeskArtes IDS/RT on Mac OS X 10.5 (Leopard):

1. Start a terminal window from Finder window directory "Applications/Utilities/Terminal".
2. Start a X terminal window with command "xterm" in the Terminal window. This starts automatically the Apple X11 also. When first time started, X11 will ask if you wish to use standard X11 environment. Answer NO to this question.
3. Start DeskArtes IDS with command "DA" in the xterm window. The Rapid Tools is started in the same way with command "rt".

Getting the License:

To get a license you need to email the Mac OS X system id to DeskArtes Oy, license@deskartes.fi. The system id can be found through the command 
"SYSTEM->Version info" after starting the IDS or RT software. 

Installing the license:

After receiving the license you must store it into the "/Applications/DeskArtes/System" directory into the file named "dalic.<system id>". The installation contains the following steps:

1. Start a terminal window from Finder window directory "Applications/Utilities/Terminal".
2. Open the license file for input with command "cat  >  dalic.<system id>". Here "<system id> is the system id number found through command "SYSTEM->Version info" in the DeskArtes IDS or RT.
3. Copy the three code lines into the terminal window using the Mac Copy/Paste commands, or type them in. If you type in the codes, note that they can only contain numbers 0-9 and characters A-F.
4. Close the license by pressing the Ctrl+D (The Control key and the D character key at the same time.
5. Copy the "dalic.<system id>" file to the "/Applications/DeskArtes/System" directory.

Mouse settings:

In the DeskArtes IDS/RT all three mouse buttons are in use for different commands. Especially in the modern wheel mouses the default functions of the buttons are not suitable for DeskArtes use, so you have to change the settings.

For example for the Logitech mouses the settings are changed from the "System settings->Logitech Control Center". The suitable button settings for DeskArtes IDS/RT are the following.

Name		Assigned action
------------------------------------------------------------------------------------------------
Left Button	Click
Right Button	Advanced Click ->  Click Type: Click   Button number: 2
Wheel Button	Advanced Click ->  Click Type: Click   Button number: 3
------------------------------------------------------------------------------------------------